RV voltage drops with nothing running.
This is the voltage (98) as it was just pulled in. If I try to turn on the AC or Refrigerator, that action will fail and the lights dim.
I know the plug and cable to the RV are good. I’ve tried other sources with the same outcome. What inside the RV should I troubleshoot next?
IMO, start working methodically to see where voltage is being lost.
- You need to start outside. Test the pedestal:
https://www.myrv.us/electric/Pg/testing.htm - Then move to the camper side of any adapters.
- Then move to the camper end of the cord.
- Then inside at a automatic transfer switch if you have one.
- Then inside at the main breaker.
- Then to the individual circuit breaker for that circuit.
- Then to each outlet in order of distance from the breaker that’s on that circuit.
Industrial electrician and full time RVer here….. voltage drop is not even measurable until 250’. What you have here is a loose connection (probably a loose neutral). Likely in the pedestal you’re plugged into.
Broken or loose neutral somewhere?
Definitely sounds like a bad neutral connection somewhere
That happened to me and it was the plug on the end of the shore cord – one of the connections inside the plug was nearly twisted off. I should have noticed it was “Camco Yellow”.
Yikes. What’s the voltage at the pole?
If you have a converter plug into the 50amp (assuming you are 30 amp). That side might be better or have no issue.
Source: Voltage Drop


