That’s the dust cover for your axle bearing grease fitting. If you can take the wheel off yourself, you can probably just tap it back on. Its normally just a press fit.
Am I the only one that thought his brake drums were glowing red!?
You will need to remove the tire. The piece that is loose covers the castle nut which tightens the hubs to the spindle.
Okay, maybe there’s a reason for this, but why does one of those wheels have an ez-lube spindle (or at least the cover for one) and the other doesn’t?
If it’s brand new. Just take that shit back to the dealer.
Since that’s the grease cap, there is a decent chance your bearing grease has dirt in it now. I’ll bet the cap itself has crap in it just from bouncing around in the trim ring.
I would pull the rim/tires off, take a close look at the grease. If it’s at all dirty you need to repack the bearings. Personally I would just repack them, way easier and cheaper to do it now than on the side of the road.
Get in the habit of checking your bearings and tires every time you stop. Make sure none of them are hot.
I know it’s overkill, I have my bearings repacked every year. Still cheaper than breaking down.
Are your drums painted red or are they glowing hot?


