In the future you can gage the width of your trailer at your doorway…idk flex seal
Patch with some epoxy and then stick a sticker you like over the holes
RV Pro here.
First, remove those screws and put something else to support whatever is on the other side.
Then fill the hole from the outside with a squeeze of clear silicon. I like Lexel. Wipe smooth.
Go shop a vinyl shop or sticker store and find one that is close to the color of your RV. Get something good and thick. Cut it into a circle, about 2″ in diameter, and put it over the hole. Will outlast the RV.
Looks like you found where you are intalling this:
My first though was to hang a picture of Homer Simpson on the screws. A small piece of fiberglass mesh and some resin would seal the holes and you might be able to blend it in, although it won’t be perfect. You can buy kits that come with everything you need
Flexseal! *SLAP*!!
Put a piece of 2×4 on the outside. /S
Source: So my screws for the RV TV mount were a little long… how do I fix / patch this?!


