I bought this Shirflo city mains water inlet as a pressure reducer to my caravan. The 2 I’ve got have the same issue, namely they leak at the entry point.
It doesn’t seem like there is a way to tighten the initial white part that spins to grab the hose adapter.
The rest of the unit is fine, and flowing water through the 2 outlets. Am I doing something wrong? This is the second unit that has the same problem.
Does it have a rubber washer installed? Seems like that’s your issue
I could be wrong…but I think it needs back pressure to tighten the exterior fixture. So when you test it as you are, there’s no way the exterior fitting can pressurize and self seal.
Correct me if I’m wrong, but isn’t that what the little port to the outside is for? The valve limits the pressure going into the RV and the excess water/pressure is shunted to the outside.
What’s the PSI at the garden hose and what is the inlet PSI rating?
I have not had good luck with pressure regulators. They almost always make the water flow to slow, no matter how I have it adjusted. I just run straight hose pressure now. I only use a flow regulator if I get somewhere that has super duper pressure, shoots the water across the site from the faucet which has only happened one time.
Not a fan of your hose connection, have you tried using a standard garden hose to test? Is there the cone shaped screen washer on the inlet?
Source: Shirflo City Water leak


