As an RV worker Delam isn’t itself bad but jt could be a sign of bad water damage if I were you I’d check to see if the seals next to the components in your roof are cracked and if so it could mean a leak and possible wood rot
It is not good as the glue is failing but clean it and hope it does not get worse.
Depends on whether they were there when the membrane was installed or if they developed. If they are new its likely because of s hole in the membrane letting water and air in. So the membrane delaminated from the decking. If they rubber was laid and there were wrinkles from the start no. But if they are new it almost certainly from water. So yes.
No, but it needs a good cleaning, followed by a protectant application…
Not too much of a problem yet. I would wash it for sure and keep an eye on it. Definitely make sure your seal is A100 around the edges and openings.
If you really wanted to you can remove the lap seal around that skylight, pull the rubber tight, it won’t be perfect, glue down the rubber, reseal at skylight and do a refinish on the rubber. Lots of work, expensive and it still will have some small ripples.
Rvroof.com
Where are you speed holes.
You need speed holes every 6” in those membranes
Source: Same roof question. Are these ripples catastrophic to my rv roof?


