I remember reading an article about a woman painting her RV and she said she had this problem, and solved it by using an oil-based primer (not latex).
We had killz adhesive primer let go too.
Now we’re working with these two products and spraying on with an airless.
TSP wash for the paper or vinyl and a light sanding for the wood.
Insl-X Stix waterborne bonding primer
Ultra spec scuff-x in a satin finish
It dries hard enough and sticks hard enough to look like it was baked on.
Available at your local Benjamin Moore
Did you try to rough grit sand the walls a bit before priming?
We used Stix Waterbourne Bonding Primer by Benjamin Moore…worked great on the vinyl wall coating in the 25 year old trailer
Should have used oil based. Latex based is no good.
When I did mine a year ago we used Gripper primer and it worked great.
Zinnser primer worked great for us, but still plan multiple coats of painting. I tried oil based as recommended by someone and nearly knocked myself out from the fumes ???? but I’ve heard that works great too! Here’s ours – 3 years of full timing and it’s held up great!
https://www.instagram.com/p/CkwqDGcOmah/?igshid=YmMyMTA2M2Y=


