Hey guys, this is a simple yet convenient deal. I have a few portable power stations. They seem to do pretty well but I’m frequently left with not enough juice from these small packs. I have a 100wh and a 300wh. Although I do use solar panels from time to time, I realized that the MPPT input accepts a wide range of voltage. I got a Milwaukee adaptor plate that came with a switch and a fuse holder, as well as an 8mm barrel connector. A 12ah M18 battery should, in theory, hold about 216WH. I have a fair amount of large Milwaukee batteries, so I charge these up before a trip.
When you clip a battery into the adaptor and plug it into a power station, it’ll start to charge at about 60w. Neat! Make sure you fuse it according to your wiring. I have 14awg so I put a 10a fuse in to be safe.
If you’re a boondocking weekend warrior or tent camper, this is a 5 minute project that can extend the life of your power banks for about 15-20 bucks.
Since your power bank only has USB out I feel that something like this would be more efficient. Much less energy loss with the various conversions
Source: Made an adaptor to top up power stations with Milwaukee batteries


