I've looked but can't seem to find anything! I bought a fancy digital combo lock for the RV but it needs a different strike plate than the one that is currently in use. The plate is trapped by the trim. I could pudding remove it by bending the trim out and sliding it into the interior of the rv, but that solution seems to risk bending the trim. What an I missing?
Unfortunately you will need to completely remove the door and frame to access this style of striker plate. Close the door and remove the trim around the outside frame. Unscrew the frame all the way around then carefully pry the door and frame off the RV. Swap the striker and replace the butyl tape around the frame. Screw the frame back on, reinstall the trim and seal with silicone. It’s about a 2hr job
Youll probably have to cut it in the middle and take each piece out, you gotta remember most rvs are built on an assembly line and are made to be built fast not easy to work on
Upvote because I also want to know. I have the same strike plate and have avoided upgrading because a replacement handle is super expensive.
Can you slide it upward enough that the bottom tab will clear the opening?
I dont have the answer but would love to see the finished product.


