Best way thanks!
What would I do? Several 1×6,long self tapping screws, and lots of caulk.
What would my wife want me to do? Buy new camper.
Without knowing more…remove the trim. Staple the metal back in place. Replace trim
Had this happen to me I pulled the trim and peeled back the shell removed the rotten wood and replaced it with new wood. PO it the shell back and stapled it down the resealed with rv caulk and reinstalled the trim.
Seems like a lot of work but was pretty easy. I also added a 3″ strip of rv tape seal before the trim after the caulk.
- Remove the trim
- Replace any rotted wood
- Tuck panels under trim and attach to RV with staples
- Attach trim with Beutel tape and screws.
First. Id see if the bottom plate and top plate need to be pushed back into the rv. If its good id Remove that corner trim and see if i can reinstall over the side wall like its supposed to be. Just look at the other side for reference.
This happen to us – it turned out the bottom of our back wall was not attached and the swaying while driving caused damage on our side wall, similar to what you’ve shown here! We fixed it with some self tapping screws, construction adhesive, a piece of aluminum angle iron for support, and caulk.
Cause?
Gonna have to see more before truly chiming in.
Really need to see the full extent of damage and what your intended future use is to see how much do a repair is needed.
Source: How do I fix this


