Left out the awning for a couple nights then brought in before trip and noticed this, is it worth repairing the awning arm or just replacing the whole awning. Thanks in advance
A new complete awning will run around 2k but it depends on the size. Awning arms only come in pairs and you are probably looking at 700-900 for the arms
If you can get me the info off the arms or size and brand of them I can get you a better quote.
Mine did the same thing and it was a cheap quick fix.
Open it up find the bent piece. Cut a piece of Aluminum 1×1 angle or 3/4×3/4 and rivet it over the bent piece one side at a time straightening the bent piece.
I did it to the other side to make it stronger and so it matches
Pictures can deceive so my apologies in advance for asking…..
Are you sure it’s bent?
It looks to me it’s just not retracted square with the other arm. Do a full extension to unwrap it, verify the tarp is centered and roll it in. If it looks like it’s coming at an angle, extend it and let it center itself. Mine looked similar when it got “slushed” on and I didn’t notice the slushy ice was causing it to not wrap square. A few extend/retractions and it’s back to normal.
Cheers
Lippert components should be able to hook you up
I don’t see anything that looks bent. You can’t just force it closed the rest of the way?
Edge is not the brand you will either look at the bottom caps or force it open to get the silver tag from in between the rails
Idk, but I blew the strut out on mine and it was by FAR the worst fix I’ve had to do on a rv.
Source: Bent awning arm.


