I searched but couldn’t find this:

Just picked up a new to me camper – 2003 S&S slide in – and the batteries were arranged in this way:

Seems like a parallel connection, but with the positive and negative off the same battery to the camper

I adjusted the wiring to be a true parallel connection with the positive to the camper on 1 battery and the negative to the camper on the other battery

However, now my battery monitor is just showing “charging” is that just because the batteries are evening out?

Any thoughts?


grumpypeanutbutter:

Not sure where you are getting “true” parallel from, but they batteries are in parallel either way. Electrically there is no difference between the positive terminal of 1 battery, the other battery or the wire between the two. Electrically that are all the same point, so you can hook it up either way and not be incorrect. If it is constantly charging one of the batteries may be bad.

mwkingSD:

Electrical engineer here – really not sure I’m following your description but sounds to me like the original configuration was correct. Might be you have turned your system into a 24 V supply that’s going to let the smoke out of some things. Was something not working before you made changes?

Completely puzzled by what you mean by “a true parallel connection.” Can you clarify?

pstbltit85:

They are parallel. Excellent battery primer that has been around for long time http://www.marxrv.com/12volt/12volt.htm

nashbar:

Do you know what you’re trying to accomplish here? It was likely connected properly (parallel) and you adjusted it incorrectly (series).

heapinhelpin1979:

Usually the battery monitor is connected via a resistive shunt that measures the current flow in and out. Look for this, and determine how it is connected in relation to your monitor. The batter configuration should not be all that important.

Jellodyne:

If the positive terminals are connected together and the negative terminals are connected together, it’s a parallel battery bank. You can slightly optimize things by connecting to the system “diagonally”, ie you connect to the positive on the front battery and the negative on the back battery. Or better yet, you can use equal length wires from each battery to a busbar. This just helps each battery see the exact same load, but it will certainly work the way it is in the OP’s picture – especially if you have lead acid batteries with a pretty linear voltage slope. Lithium batteries have a much flatter voltage slope as they are discharged, so you’d be more likely to get your batteries further out of sync.

RuralLife420:

This looks to me to be a stacked configuration not a parallel. Wouldn’t a parallel system have a battery backup instead of dumping it’s juice in unison with the other?

Source: Battery question

How to Winterize Your RV eBook

FREE eBook...
'How to Winterize Your RV'

Your Guide for RV Winter Living & Storage.

Valuable Tips & Info help you prepare for cold weather. Includes winterization instructions for full-time or part-time winter RV living.

It's FREE and there's no obligation...
Download your copy today.

Thank You! You will be redirected to the eBook download page shortly... After you've had a read through, please let us know what you think about the 'How to Winterize Your RV' eBook.