I woke up this morning to a double whammy in my recentlt full-time RV. The AC capacitor went bad, and the fan motor burnt out while sleeping because I foolishly left it on. I awoke to the burring noise of a locked motor, and when going to the bathroom after turning it off, discovered a soaking we carpet. Attached is where it is leaking, I placed a new O-ring inside but the leak continues. It seems to be coming out of the bottom part. Any advice? Do I need to replace the entire plastic bolt/endpiece assembly? I've never worked on plumbing before recently, and just replaced the Wax seal underneath wirh a Korky wax-free thinking it was the wax getting warm overnight.
Any help would be much appreciated.
The pic isn’t the best, but if it’s similar to my aqua magic I had a leak there shortly after we bought the trailer. The fitting just wasn’t tight.
I had to replace the valve assembly this year but that was leaking from the top of the valve. Its possible it may be leaking from somewhere else in the valve and not at the fitting itself.
Mine was very easy to replace as the toilet is about 4 inches from the wall. The YouTube videos I watched they had to remove the toilet so ymmv.
Otherwise the fitting itself may be cracked and that would need replaced. Looks like you have a hose going to it? Mine was pex so that might be more difficult depending on what you have there.
I ended up putting a tee in at the pex behind the toilet and added a handheld bidet.
Source: Aqua-Magic V leak?
