Use a cutting wheel to cut most the way through old race, then split it in half with cold chisel
Purchase and install all new bearings with new races
You can also purchase a new loaded hub that comes with new bearings and races already installed
Then learn how to do yearly bearing packs as part of your yearly maintenance routine
The picture doesn’t show it, but some axles have bolt on spindles you can replace. If not I would buy an axle kit. Less than $500 on Amazon. Refitting bearings on a messed up isn’t worth it. You’ll be driving down the road with constant worry.
“trailer spindle”
Just unbolt the whole hub assembly. Take to a trailer parts supply place . you could buy the complete assembly for not that much money . Something in the $ 200 range + Greece which you should get the other wheel bearings new seals and repacked with grease. Not a big job if you are at all handy with tools
If the spindle is badly damaged, replace axle.
Replace linings and hubs.
I repair electric brake trailers for a living.
Hopefully, you got stopped before the wheel fell off.
Axle. The bearings, seals, backing plate, shoes and magnet all come as a kit. Complete bolt on. Drum too. If the spindle threads are damaged, do you feel safe with it going down the road like that? Even with a cotter pin?
We use Six Robless for our stuff. A lot of the axles are made as needed since Covid.
Zooming in the threads don’t look that bad at all. I’d chase with a die. Then tap the race off. Spray it all down with brake cleaner. Then put a new loaded hub on. Then fill the hub with grease through he easy line fitting in the end of the axle.
Source: Bearings blew, had it towed, got it apart and found this. What do I need to do?


