At least once.
It might say “RV use only” but it wouldn’t be the first one that was wired for 220v. Check it first.
As an electrician, I can tell you that it is a 30a 120vac rv outlet. What I can’t tell you is if that will supply 120vac 30a power.
First thing you need to do is get your multimeter and verify proper voltage at the plug.
If you don’t have a meter or know how to use one, zeroth thing you need to do is get a meter and learn to take basic readings with it. Every homeowner or rv owner should be able to do basic checks with a meter. You don’t need anything fancy. A basic auto ranging harbor freight special will be fine
Second thing would be to flip off the breaker. (notice what the size if the breaker is. It should be no more than 30a) verify there is no power at the outlet and examine the outlet. Make sure there is no corrosion on the contacts, look at the wires connecting to the outlet and make sure the are tight and in good shape. If there is any question, put a new outlet in there.
That receptacle is upside down. I ain’t trusting anything that “electrician” did behind there without fully verifying it myself.
I’d hire an electrician to take a look at that. It might be able to be used, but I would want to make sure the wiring is correct, including the wire size.
In theory yes, but check it with a multi meter to make sure it is 120V, as some people will use whatever is handy to wire up a 240V welder, etc. There is one just like this in the shop building on the family ranch that was used to plug in a 240V stick welder.
That is a 125v 30 amp receptacle, printed right on it. You can plug your camper into that with the correct adapter, similar to the 30 amp hookup at a campground. Most decent size RVs today need 240v 50 amp to run everything but can run a reduced load (no AC, etc) on this outlet. Just depends on what rig you have.
I can’t tell you about EV’s but I’m fairly certain no, it won’t do you think it will do.


