More floor space, sure, but you lose storage.
Just start pulling parts of it off, the fasteners should start showing themselves as you go. It’s just a cabinet. There will be electrical lines in there you’ll have to do something with but the removal process is pretty straightforward. If I were you though I’d look at the adjoining overhead cabinet and figure out how to stabilize that, its probably using the corner cabinet for structure.
I’ve removed cabinets in our one TT and placed them elsewhere since it didn’t make sense how they were and it’s better utilization of space. One was a wardrobe right in the middle of the couch and rear queen bed which blocked the view of where wanted to put the flat screen. We just cut it out with a sawsall and put it over the bed horizontally as a storage cabinet. They also had a small cabinet back there we repurposed as a pantry cabinet.
Did this a few weeks ago and it was easy. Most of the frame I removed was held together with pocket hole screws and there will be a few normal screws holding the frame to the wall and roof. The panels are stapled and will just pull off. Don’t be tempted to rip it out, you will damage the wall, just take out every screw one by one
Im afraid I’ve been using the term caddy corner wrong my whole life. I thought it meant opposite, like NE is caddy corner to SW. I’d just call that a corner TV stand. Am I wrong or misunderstanding?
I have not removed that particular unit but something similar. It appears you unit is not screwed into the ceiling, so the whole thing would have to come off. You should have screws in the 1×1 frame of the unit. What are your plans, so remove it all?
I see where you’re going with this, that corner looks like it would fit a 28″ griddle perfectly,


