I use city water, but my water pump has started leaking. Water goes to it and is stopped by it being off. So water has sat there, possibly froze or corroded the really old unit, and now there is a leak. (Not mine in the picture. I googled this pic)
I would like to just cut off access to it. Put a male end piece either on the white connection if possible or cut the pipe and add an end piece. What would this piece be called? Could the piece be found at Lowes or home depot without ordering?
You are looking for a 1/2” plug with male pipe threads. I would suggest doing on both sides of the pump to avoid problems if you are not planning on using your pump.
Would this work?
It’s readily available at home centers.
Pipe cap from any hardware store
You are looking for either a male or female threaded fitting. Be sure you know the diameter of the line you want to modify
It’s a pretty standard plumbing fitting available at most hardware stores. Available in brass! 0lasyic! But id stick with brass one side is threaded to attach to the pump. The other for the PEX line to slip on
Edit: misunderstood the post, thought you were needing to replace the circled piece. If you want to cap it off, use this:
https://www.homedepot.com/p/Apollo-1-2-in-Brass-PEX-B-Barb-Plug-APXP12/301541165
You’ll need pex crimping tools. If you don’t have that you can buy a 1/2” threaded plug
Source: Looking for a part name/size for a piece that will end a pipe.


