That quick connect is low pressure. If you try to use it, you have to supply the proper pressure to it. You can’t just connect a tank.
There’s no way to connect a second tank to this without replumbing, unless you connect low pressure.
Maybe contact a propane delivery service in the area you’re going, and have them refill the tank onsite?
Go to a place that will refill it and fill it back up.
The quick connect is for a grill.
There must be another connection somewhere
I took a second look at this photo, and your regulators may be connected to the main tank via a POL fitting. It’s hard to tell, but it might be. If that’s the case, you can shut the tank valve, unthread the POL fitting, and install one of the stay longer kits there, and then thread the original POL valve back into the fitting. This will shift the regulator to the right, which may not be workable in your case–I can’t see what’s to the right of all this.
You need to install an “extended stay” kit here, between the valve & the regulator.
That’s under a motor home.
The quick connect is for a BBQ grill.or other appliances. You cannot back feed through it.
The fill point is under the yellow cap. An extend-a-stay kit might have the proper fitting for connecting to the fill point.
Check your local rv or propane suppliers for the correct connector.
As an aside, when I had my motor home, I could run for almost 2 months on a full tank in the winter, so first thing might be to make sure that tank is full.
ETA and spelling – if you try connecting a tank to that quick connect, you’re still putting pressure against the regulator and can possibly damage it so don’t listen to the people saying just connect to it. The correct connecting point is under the yellow cap, which is clearly labeled as “fill”.
Well thank you all for keeping me from blowing myself up.
I will be buying an extended stay kit from Amazon.


