First of all, thank you to everybody who responded on my last post, and helped me realize that this was the best option for my situation.
I have 4 lithium batteries, and will be replacing my WF9865 with a WF9865-AD auto detecting/ lithium compatible converter.
Many have said it’s a super simple project, however the YouTube videos I’m seeing are indicating (without elaborating, of course!) a few things that seem critical that I need guidance on.
1: lithium batteries need to be fully discharged in order for the auto detection to work? Does that mean I need to unplug from shore power (probably overnight) and drain the batteries till they’re dead? Then install the new converter?
2: torque… a few YouTubers indicate torquing the cables to spec was important… but never showed that step… is it really that critical or can i just tighten it a bit more than “finger tight”?
Thank you so much, Redditors, for being my knights in shining armors!
Yes, #1 is why I did not buy this brand.
I would recommend returning that converter and getting a different one. I have this exact converter and will be replacing it this off-season. It never puts out more than about 15 amps no matter what charge my batteries have (last time took over 24 hours to charge my 200ah LFP from 18% SOC to 100% SOC). I have seen many other complaints in my various browsings of Reddit and forums. This can easily be replaced with another brand (Progressive Dynamics, Boondocker, etc). Best of luck if you decide to keep it.


