Looking for advice on repair ?
Check for moisture. This could be something as simple as a separation or as bad as moisture got in from the roof.
Something like this is pretty straightforward.
As noted check for moisture.
If it can be pushed back and is straight you’ll need to re-glue it. Use something like 3M headliner spray adhesive and spray the panel and the wood it attaches to for best results.
If the panel is warped you’ll need to replace it. You may also need to replace the t-moulding. There are you tube videos about how to do this part.
Is that the trim or the edge of the panel?
If it’s the plastic T shaped trim, it will sometimes shrink a little and pull itself out of it’s track. Smack it and it should pop back into place.
This doesn’t look too bad, sometime the plastic trim that hold the finish trim is not fixed that well with the proper amount of staple. Of course check first for some humidity test to see if it’s cause by something else. I work as an rv tech and i come along this issue very often on brand new unit
Source: Interior Roof Repair


