Just bought a 22 ft camper I'm trying to come up with a idea how to enclose the kiddos safely that's the space I have I thinking of doing a door but curious as to what other people have done.. Kiddos are 1 and 2.5
You can get flip up bed rails. There are a bunch of different sizes so I found one that fit our opening perfectly.
Our 1 year old sleeps behind it
We just used a pack-n-play for ours. They make some little gates you can put up that slide under the mattress to hold themselves up but they’re pretty flimsy
Depending on how big that lip is on the bunk I did for my kids’ beds, were brackets from an ikea bed rail kit and attached them to a pre made shelf and cut it to length Then it can be taller and can just slip onto the lip of the bunk and taken off. If you look up, the ikea nattapa bed rail basically this but beefed up. If that helps.
For an infant I just used this smaller pack & play with bottom zipper opening that he slept in for a couple years on our dinette. Smaller than the large graco ones and folds up into a rectangular bag. Not sure if the height is shorter than the lower bed though.
We use this expanding gate off Amazon to block in the bottom bunk for our almost 2 year old. It was the perfect size to fit between the top and bottom bunk and the perfect length. I cut a 1×6 board and mounted it so the bottom of the gate couldn’t get pushed out. It mounts with small eye hooks so in an emergency it could easily get ripped out by an adult. We just slide it back to put the kid to bed and then lock it in place. I can send pictures if needed. We’ve been using this for about 5 weeks this summer and no issues yet. Before this was just a pack n play but they do take up a lot of room in a camper.
That seems unsafe. We used a pack n play until my son was old enough for a regular bed.
For my kids, I took a sheet of 3/4 plywood, cut about 18″ of it off and made it into a ‘bumper’ by screwing it to the remaining sheet of plywood with 3 heavy duty brackets. The mattress sits on top of the plywood and the combined weight of it and the kid on it keeps it in the bed. Only thing I wish I changed was the bottom corners were left square and catch and can rip sheets.
My daughter has slept up here since 3. You might want to add some sort of a gate in the opening or a half high bumper your kid has to climb over for extra safety.
Source: Infant and toddle bunk bed ideas


