The previous owner replaced the AC on my Coleman 16FBS and it flew out on a rough forest road near the Grand Canyon, likely due to improper installation. I've replaced it today but it now basically looks the same as when I bought it. Any thoughts on what the framing looked like before or what would make sense to make this less unsightly? Rest assured, it's far better secured now.
Ugh, any suggestions on how to frame this air conditioner*
It was a molded “box” that slid over the whole end of the unit and bolted to the wall.
You should be able to find one online, or maybe contact a Coleman dealer to order one for your unit (not sure about Coleman, but I know that many manufacturers sell replacement parts).
You can probably find some pictures by searching for your model of RV, and looking at used ones.
https://www.youtube.com/watch?v=LMFGUbplRws
In the first 20 seconds of this video you can see what the original looks like.
This is the original installation method, but it’s missing the cover on the side. You can check with a Coleman dealer to get the right part, hopefully it’s available.
That big black thing on the roof is the original AC. The previous owner cut a hole and installed a window unit instead of replacing the rooftop unit. Most travel trailers don’t use a window unit unless they are in a permanent setting.
Maybe 1×3 pvc board
Source: Any suggestions this air conditioner, or how it was done originally?


