A backer behind the plywood. A chunk of 2×4 or something like that. Insert new bolts. Or if you already have a decent bit of wood, you could drill through and use bolts backed with washers and nuts.
I finally did it. I backed my RV into its parking space and heard the sickening noise of running into something. Luckily, the damage seems constrained to ripping the bolts through the thin layer of plywood and fiberglass. I’ve done automoive sheetmetal body work but am completely lost when it comes to this sort of repair. I’m especially worried about creating a fix strong enough to retain the bolts.
Just guessing.. but JB Weld the bolts back into the spaces???
Do yourself a favor and remove the awning completely. Awnings are nothing but trouble.
I had a similiar problem with my top mount of the awning. I used that JB Weld plastic bond stuff (they have many options). I heavily gooped up the bolts with it and slowly drove them back in. It hasn’t moved since.
Yeah I might go with the above recommendations if you’re not able to access the inside. Just fill the holes with some type of jb weld until there’s no void then let it harden. Put the bolts back into the jb weld
I’m not a fiberglass guy, but I worked at a marine shop that did fiberglass work.
The “correct” repair is a lot more involved that what you probably want to do, but as far as I understand, it would involve grinding out all the broken chunks and pieces with a sander or flap disk, removing the sheared screws and repairing any backing that the screws were anchored into, filling the hole with chopped glass/resin, sanding/blending it smooth and then respraying a color-matched gel-coat.
Practically speaking from a DIY perspective you might have a few other options for a less perfect repair.
The “worst” option would be to just sand off any chunks sticking up, cover any cracks and holes with 3M Marine Adhesive Sealant (5200 is strongest, 4000 UV is strong and will withstand UV) and then just drilling new holes right next to the old ones (assuming the backing material is large enough/strong enough to hold a new set of screws).
The intermediate repair might be to grind out the damage, repair any backing and then cover the area with a bondo patch and paint that matches the surrounding fiberglass. Just be careful drilling and installing new screws so it doesn’t chip/crack the bondo.
The primary concern in ANY case will be preventing water intrusion. You don’t want an old crack or exposed screw hole to slowly turn into a rotten wall because of water seeping in over time.
Source: Hit a post and broke off my awning mount. Any tips on how to repair?


