Just got this 89 dodge falcon with 68k miles. Every thing seems great so far. Had a 4 hour drive back home at it drove great! Hooked up to power and everything seems to work fine, but I can’t figure out how to work any of the propane stuff. The tank shows as being full. I’ve turned the outside valve to “on” but the stovetop doesn’t make any hissing sound when turning the knobs, and I don’t see any way to ignite it either. Can’t get the fridge to ignite, water heater does not turn on, and the furnace does not get warm, so I’m either doing something wrong or something’s broken. The valve has 3 positions, “off” “on” and “pilot”. Any help would be appreciated!
Needle on the gauge could be stuck at full. My tank had a bleeder valve that had to be opened when filling. It will be in the cluster with the gauge and fill port. It should be finger tight, with heavy gloves on, crack it open to check if you have pressure in the tank.
If you have pressure, it could the the regulator. Turn the tank off and crack the output line from the regulator, you don’t have to remove it, just enough to create a leak. crack open the tank to check for flow with soapy water.
Always be safe, work outdoors with no open flames. Sorry, I had to add that…
Gods I want one. The perfection.
Needs a crescent moon window on the side
what are your propane issues?
There’s a bigger question here:
Did you use a camera as old as the vehicle itself to take this photo??
Needle valve could be dirty or stuck, I had an old Wilderness trailer, the propane system was the bane of my existence for a period of time. Changed out the needle valve that was clogged and voila!
Source: Just bought this ‘89 dodge falcon! Need a little help figuring out the propane stuff?


