I cut a roll of reflectix to fit our windows, same idea and it definitely helps keep it cooler and darker so kids sleep later!
Looks like this could be easier to use overall, but I’d worry those velcro dots wouldn’t last long
Just saying that I was connected to shore power with two full size AC units on a 30-ft rig and could not keep it cooler than 85.
It literally forced us into an apartment it was so hot. Just want you to have a heads up that the campers are not designed for that kind of heat typically.
Texas here. Cover windows with reflectix double layer. Like bubble wrap with silver Mylar. I used Velcro strip, the dots weren’t strong enough and adhesive melted. Then get some 2” foam, stiffer is better, and cut to fit (big enough to hold itself in) your crank up roof vents. In our class C we no longer need the generator and roof unit while driving, just the dash a/c at over 100. Sleeping in is way better, too!
Former Texan here….
Line the inside tops bad backs of cabinets with Reflectix.
Cut Reflectix to fit every window. (Velcro dots glue melts away; we just cut ours a little big and wedge them in.)
If this is a motorhome, hang two king flat sheets behind the cab to “hold” the AC in that space while you are driving. (And even with the shades down, they will hold some of the heat in the cockpit while parked, keeping you cooler then, too.)
When (boondocking or otherwise) possible, park so your fridge is on the east or north side to give it the most shade.
If there is little-to-no wind, use your awning(s), but only when you are at the rig. (Don’t leave them unattended unless you want to pay for a new AC unit for you and/or a neighbor or two.)
Use neck wrap coolers.
Wear moisture wicking shirts. Never wear 100% cotton in hight heat.
little window awnings and aftermarket window tint can make a huge difference. Our’s has a lot of exterior black paint so it gets hot, but is much more efficient with those things out.
Ceramic tint to all windows. Reflects most of the heat.
Get exterior shade on the RV- Awning out – window awnings – exterior cover for windows etc.
Use reflective insulator fabric and not the black. The black will absorb all the infrared radiation (heat) from the sun and it will feel like your rig is an oven. In a pinch you can even use aluminum foil (it’ll look janky but I say fuckit if it’s 110°F outside.) It will reflect not only the light but the infrared (heat) as well.


