Once it is fixed you may want to consider adding a 90 degree elbow to relieve some of the pressure of the hose going straight in. We picked ours up a an rv place and it was pretty inexpensive.
I had the same problem, just replace the gasket.
I’m camping right now, otherwise I’d pull the screws and look. I don’t want to make it worse. Hoping to order something so the part is waiting for me when I get home.
Edit: 2022 Grand Design Imagine 2600RB
RV Pro here.
That is called a water inlet. If it leaks on the front side it is because your gasket has become hard or thin and is not sealing. Just replace the gasket and it will solve the problem.
As others have stated, get a 90 to take the weight of the hose off of it.
Lastly, you can totally remove the screws and take it out of the all. On the back side is a 1/2″ female pex fitting (on the water line) which screws onto the 1/2″ nipple (water inlet backside). You will not mess anything up just pulling it out. But from what you describe the back side is not the leaking area. It is the front side. The two things above will take care of that.
I just replaced mine. It’s a five minute job. Here’s the link to the video if you’d rather watch. https://youtu.be/x0EKtWmTjw4
Tim Eagle/ Dark Nest Travels
Like others have mentioned I would replace the hose washer.
They make brass ones that don’t leak


