What’s on the other side? Can you do a board on the other side? Screw through the veneer and into that backing board? That’s what I did to hang a basket on the side of our cabinet. Backing board is inside the cabinet and not seen.
Maybe a stronger board on the same side as the hanger that is a foot or two in length to distribute the force?
You should look for T-nuts (with holes, not prongs) to use with machine screws (if you have access behind that panel), or Well Nuts to fasten it if you don’t have access behind panel. A bunch of clothes on hangers bouncing down the road is going to put some load on that, so a penetrating fastener is the best approach.
I suggest metal drywall anchors and screws. For added strength add a strong epoxy made for wood. If you don’t overload the rack with heavy coats you’ll be fine.
Had to deal with something like this awhile back at my gf apt. Ended up pulling the shelf out and getting a piece of 1/2 plywood and placing it under the shelf. Cut to exact same size and just lay shelf on top. Screw hangers into plywood. Done deal. But I would also suggest predrilling your screw holes. Be surprised how much of a difference it makes
Would probably be easier to take it down, put up a piece of 1×4 all the way across with liquid nails and screws and blocks at the walls then screw to that. Would lower your rod by like 3/4” but you wouldn’t need all those brackets.
Honestly I’d just go with a strong wood glue or epoxy resin
Molly Bolt: Your friend has shared a link to a Home Depot product they think you would be interested in seeing.
https://www.homedepot.com/p/Prime-Line-Molly-Bolt-1-1-4-in-Standard-50-pack-Z-10532/317693457
You can also use rivets but without being able to use a backing washer makes it questionable.
Source: ideas for screws into thin veneer wood?? more in comments


