I have a 1990 Fleetwood with an almost identical body as your Airex. My batteries are located down low under the front hood on a tray just behind the front bumper and there’s an electrical box mounted high on the drivers side firewall containing 2 large relay solenoids and a multi-fuse block within. The house and chassis batteries a set in the tray. House positive battery cable goes to one of the solenoids, whereas the chassis positive battery cable is going to the other solenoid. The negative batteries (ground) cables go to and are bolted to the chassis frame on either end of the battery tray. The gen-set has a short negative (ground) cable attached to frame behind gen-set compartment and the positive cable runs along the frame all the way up to the battery tray and can be connected to either house or chassis batteries. Hope this helps in your dilemma.
Bare with me, I’m new to posting on Reddit- 1989 Airex project. I’m currently stuck on a house battery issue. Anyone with something similar find that they only have 2 positive cables inside the house battery bay? I’m hearing it’s ground comes from the onan generator? – so one positive wire to the gen, and the other to a solenoid on the firewall at the engine
Source: 1989 Airex by rexhall


