That pipe looks to be made of pex. Buy a sharkbite adapter and go from there or find someone who has a pex crimp tool and crimp an adapter to it. Best of luck! If you have any questions feel free to ask =)
Not sure on your climate, but if freeze isn’t an issue, a sharkbite sillcock would solve your problem really fast.
Never saw your post and don’t know what your issues or facts are concerning this water source but if you are going to drink or cook or bath with this water have it tested or confirm it meets municipal tap water minimums. I’ve seen abandoned capped wells that you could get water from with extremely high arsenic levels among other nasty stuff. Found a 1.5” cast iron pipe 12+’ underground with no apparent source but clear water came out. Never figured out what that was. Had a heck of a time capping that old pipe. That brings out the type and condition of the delivery pipe. Even if the water looks good ask someone from Flint Michigan if it’s safe. If you want to cap it off there are a lot of PVC cements that will set when wet, just not under pressure. Use a threaded end and glue it on while running. Once it sets thread on your tap.
If it isn’t permanent, might just use a water bandit and call it a day. 🙂
https://www.youtube.com/watch?v=WGfJ4mz_lbI
if it’s not a long stay i’d just hack it with one of these. Fill the tank and use tank water, not city water.
If you can stop the water, glue on an adaptor and go from there. If you can’t, use a shark bite and let haters hate.
Sharkbite. Done.


