Silly question. I bought a new RV and trying to plug into shore power. I bought this adapter that looked correct, but the “L” shaped prongs are flipped if that makes sense. They literally mirror each other.
Can I flip them on my RV? Or are they different? Thanks everyone in advance.
Your RV is probably a 30Amp unit. That is a 50Amp plug.
Do you have a photo of the inlet on the RV so we can see its layout? I don’t understand what you mean by mirror image as I would expect that for the inlet and plug.
The part with the red circle connects to the RV – it’s a twist lock. Then you plug in a regular (recommended the highest gauge/shortest run possible) extension cord into a 1120v outlet on your house. You will not get full use out of your rig this way though. You need a regular 50amp cable to connect to an RV park.
[removed]
Does your RV have removable power cord (one that screws onto the RV), or is it a fixed cord?
What you show in this photo is intended to screw onto a plug on the RV, not connect to a power wip coming off the RV.
If you have a permanently fixed power cord (wip) coming off the RV with then what you need is a Dogbone (example: https://www.cabelas.com/shop/en/camco-rv-power-converting-adapters?ds_e=GOOGLE&ds_c=Cabelas%7CShopping%7CSmart%7CCatchAll%7CGeneral%7CNAud%7CHigh%7CNMT&gclid=Cj0KCQjwj7CZBhDHARIsAPPWv3cUnglqMKOFwqB5_BAk-AgcvoV4OlkdgKmTSIwV-MqjypwSkK2LpQ0aAkDMEALw_wcB&gclsrc=aw.ds)
[removed]
Source: Plug question


