You got a leak somewhere
You either have a leak in the pump which will require the pump be replaced, air in the lines still, or you have a leak in the coach somewhere. The screw on fittings have cone washers, and they are famous for leaking if the come just a little loose.
Mine was doing that when my water heater winterizing plug was just half a turn loose. It would slowly leak water and then the pump would kick back on.
If you suspect the pump is damaged or old, maybe you can budget for a replacement pump, because you’ll need one eventually anyway. If the problem persists you have eliminated the pump, and you may find where the problem is by simply removing the existing pump and putting the new pump on.
Good luck and let us know how it goes!
Mine also has a bi-pass valve for the water pump. It is used to fill the fresh water tank. If this valve is leaking my water pump will cycle on and off.
How long has it been going on? Is it consistent all the time?
Generally, the pump running when all the faucets are closed means there’s a leak somewhere. But after I turn my water heater off, as the water cools down and condenses in the tank, the pump runs occasionally for a little while to level out the pressure. If it was only happening for, say, one afternoon/evening after turning off the water heater, that’s a possible non-leak explanation.
Another easy thing to check is making sure that little strainer is clean and screwed in tight.
haha I haven’t used my water pump ever ????


