Use a bearing puller.
Pull the bearing and the seal will pop out.
Gonna need to repack the bearing anyway……
From the opposite side stick a crow bar or long punch brass if you have it. Now tap on the bearing lightly but hard enough to knock the seal out. Works every time and I’ve never hurt a bearing by doing this.
https://i.imgur.com/r32I6kP.mp4
Beat the fuck out of it
Put the drum back on the spindle leave the outside bearing off and put the spindle nut back on. Pull the drum/hub off quickly letting the nut pop the inside bearing and seal off
I replaced the wheel seal on my truck and 2 on the trailer in a parking lot with a crowbar. Just use the curved end and work around in a circle. 2 minutes, max.
I used a claw hammer and something to tap handle of claw hammer.
Work in a circle. On one of them I had to put some force on it, came right out.


