Bad alignment, worn suspension, or bearings going.
Jack up the trailer on the frame, stick a jack stand underneath for safety, grab the wheel at 6 and 12 o’clock and shake it. Do the same thing at 3 and 9. It should have a tiny amount of play but not a lot. A lot of play would indicate a problem with the bearings. Take the wheel off and take something long like a crowbar and use it to check for play in the suspension bushings.
Inner tire ware is typically flat axle. There is supposed to be an upwards arc in the axle. If u visualize an axle qith an upwards arc having nice level tires, the press that arc down, the bottoms of the wheels kick out causing exactly that wear.
Axle alignment issue of some kind.
Find a place that does trailer alignments. Think semi trailers.
In addition to what has been recommended – just know that some tires suck and wear that way b/c they are poor quality. If all else checks out good then maybe switch to a good well-known brand, have them balanced, and always maintain correct pressures and that should help. Oh! And TPMS!
Bearings were my first thought. The axle should be causing abnormal wear on both tires on the axle. Alignment could be it as well, but I would definitely jack it up and check the bearings before I did anything else.
I’d bet that the wheel bearings are loose, causing the wheel to toe out. You should also check the u-bolts that attach the axel to the leaf spring. Just put a wrench on the nut and make sure it’s good and tight.
You could lose the entire wheel if the bearing fails, and you’re definitely heading for a tire blowout, so get it checked ASAP. Any mechanical shop can easily handle either problem. If you’re handy, you can probably find a YouTube video on tightening up the wheel bearing, you just have to be careful not to over tighten it.


