Did you grease the bolt you put back in?
You probably already know this but I’m assuming the bolts aren’t garden variety ones but probably high strength ones like Grade 8. I would think those have a high shear load on them, probably why the shoulder is worn. Also seems like there shouldn’t be wear on the threads, the shoulder should be taking all the shear load
This is not a slight on the product just a reminder that things wear over time. Prepping for this year’s big trip (2700miles) and put in new sway bar pockets. I didn’t realize the 10 and 12k bars used different pockets so that may have contributed to this condition. Either way, the bars would easily pivot about this bolt noatter the torque so I figured it’s well past replacement time.
I’ll add hitch tear down as a yearly maintenance point.
Do you think they loosened up first, then damaged the threads, preventing them from being properly tightened? From the wear pattern on the head end, it looks like the bolt would last a long time if it were kept tight & straight.
I use those same Milwaukee gloves for all my auto utility work. It’s amazing how much crap they absorb without it soaking through to your hands.


