dar_catan:

That’s a 30 amp PWM charge controller. Why people are saying otherwise is weird.

It can take up to 600 watts of solar.

https://gpelectric.com/products/30-amp-digital-solar-controller/

This controllers allows for roof expansion.

Solar on the side is a separate system. You need a panel with a built in charge controller to use it. These hookups are usually max of 10-20amps.

Delver-Rootnose:

Yes you can, within limits. Find out what the rated max voltage and amperage of that controller. 100 watt panels almost never output more than 4 amps. If your controller can handle 30 amps, as it seems to indicate by model number, then you could probably handle up to 6 panels all in parallel. The one caveat. The more amperage your system handles, the thicker the wire. You might have to replace the cables between the solar controller and the batteries. Likewise, at least where all the panels join up, you’ll have to use thicker cable. Also, you’ll need to check and replace all the fuses to match your max amperage expected. So check and get another panel. I’ve also got two panels using SAE connectors.

One other thing comes to mind for PWM controllers, like yours. If I remember correctly, they don’t like wildly varying solar panels. By that, I mean a 60v solar panel and 20v solar panel, running together. So check and add something similar to your current panel.

That’s all I remember so far.

thewinterfan:

Triple check the polarity of that SAE plug on the side. Yes, it’s most likely wired straight to the battery, but if it’s a Zamp they wire it reverse polarity just to be dicks.

sexycornshit:

Yes. That panel is rated for 20a. That’s about 400 watts of solar panels. That can have up to three more 100w panels wired in parallel. Just climb on the roof and mount, you’ll u can tie into the factory wiring on the roof.

If you’re talking about the solar on the side you’ll need a separate controller. That plug isn’t connected to the controller. Most of the suitcase panels have controllers, but make sure.

pa23235:

As others said yes! Your plug in the side is likely wired directly to the battery, hence needing a controller. That’s how both my of my last 2 TT were. I rerouted the side plug to the panel. That can be very easy or very hard depending on the trailer.

BrushaTeef:

My dad’s TT has the controller pictured along with a 100 watt panel on top. It also has the “solar on the side” plug. If you go to the website on the sticker it says to buy a whole kit with a controller to plug into the SAE port on the outside of the TT.

But we already have a controller?? If I buy my dad a whole suitcase panel and controller will it work in conjunction with the other controller and panel already installed?

I read that the external SAE plug is wired straight to the battery, not to the controller inside. It’s a little confusing. Thanks for any hints you can give me!

Source: Dumb question? Can I add more panels to this solar controller? More details in post

How to Winterize Your RV eBook

FREE eBook...
'How to Winterize Your RV'

Your Guide for RV Winter Living & Storage.

Valuable Tips & Info help you prepare for cold weather. Includes winterization instructions for full-time or part-time winter RV living.

It's FREE and there's no obligation...
Download your copy today.

Thank You! You will be redirected to the eBook download page shortly... After you've had a read through, please let us know what you think about the 'How to Winterize Your RV' eBook.