We’re happy to announce the latest winner of our ‘Win Your Purchase’ contest.
Congratulations to Yoko!
Here’s their winning review:
“We got EZ exterior window shades for our 3 skylight windows. Before ordering, we called customer service for some questions, and the person who answered the phone was very friendly and knowledgeable.
Once we got the products, my husband put the adhesive studs on the skylight windows. Super easy! It took him less than 1 hour to put the studs on all 3 windows on the roof. After waiting for at least 24 hours, as instructed, he put the shade screen on the windows, again in about 1 hour. He said it was very easy.
Now how do we feel about it? We love it! Before the installation, our living room/kitchen can be really hot especially in the afternoon in summer when the sun hits the floor directly through the windows for few hours. Now with the shades, although the room still gets warmer, the temperature does not go up as much as it used to be. Definitely, we are saving some energy bills. We also like that the shades darken the room but do not completely block the sunlight.
Before we got the EZ exterior window shades, we explored the option of motorized blinds on our skylight windows. But it is very costly, and we heard a lot of trouble with them such as the remote stops working after a season. We chose EZ exterior window shades, because, hopefully, they will last long, and we can take them off in winter/fall, if we want.
So far, we enjoy the shades every day, and we are very happy with the purchase.“
Congratulations again Yoko, and great job on the installation.
P.S. – If you have entered our contest and did not win this time, don’t worry; your entry will be also entered into our future draws as well.
If you don’t know how to measure your window, there are a few things to consider.
The first step is to determine where you want to mount your fasteners.
You can mount your EZ Snap shade screen on the window frame, on the trim or on the siding.
If you are planning on using the adhesive fasteners, you will need a 1 inch wide, smooth mounting surface.
For people who have a domed skylight and aren’t sure how to measure it, start where you will be mounting your fasteners and measure across the dome itself.
Once you have the height and width for your windows or skylights, add an extra 2 inches to all your measurements.
Your shade mesh will be mounted an inch past your fasteners, so adding 2 more inches in height and width will account for the extra shade mesh needed on the top and bottom, and both sides.
Now that you have your measurements, enter the numbers in the appropriate fields.
If you have multiple windows of the same size you have the option to change the quantity.
Next, enter your email address and press Calculate.
Our program will analyze your measurements and will let you know the recommended size of shade kit, how many fasteners you need (in total, as well as how many per window) and how to cut your mesh.
You will also get the results emailed to you to have as a guide when it comes time for your installation.
You can see there is a category called ‘Max fastener spacing’. The calculator takes into account the size of your window and will automatically adjust your required fastener spacing.
We recommend a maximum of 10 inch spacing between fasteners for windows under 25 square feet (which is most windows). If your window is 25 square feet or larger, then you will need a maximum of 5 inch spacing.
We also recommend placing an extra fastener on all four of your window corners.
There is going to be more force on the fasteners in the corners, so placing two in every corner and offsetting them will give twice the holding power and will help keep your mesh secure and problem-free. Our calculator automatically adds an extra 4 fasteners to every window.
You can see the results below include an easy to follow cutting guide where all the different windows are labeled and have their measurements included.
No more guessing, no more math, just enter in your window or skylight measurements and find out exactly what you need to order.
The reason why it’s such an effective method at reducing solar heat gain is because it stops the heat from entering the house.
It’s why window blinds and drapes are not effective at keeping a house cool. They are on the wrong side of the glass.
Windows are typically the source for up to 48% of the heat build up inside a home, and blinds can only knock down a fraction of that.
That’s because when your shade is on the inside of the glass, then the heat has already gotten inside the house and you are fighting a losing battle.
The key is to stop the solar heat from ever getting inside the house in the first place, and that is what exterior shade provides.
EZ Snap exterior shades can stop up to 90% of solar heat, which means you will get a more comfortable space and a lower energy bill.
As for what kind of difference that means in temperature, here are some customer reviews of our shades that show what our shade kits can do.
Window Shade Temperature Difference
James wrote to us because he was ready to install another AC unit before finding EZ Snap.
“I have been searching for years for an inexpensive way to cool my upstairs.
I was almost ready to put in a second HVAC system when I stumbled upon EZ Snap.The windows face west and they get pummeled by the sun.
I just installed these and with my thermal imaging camera there is a 23 degree difference between the window with the solar shade and the one without.
I could not even believe it. I went back every hour to check and it was still the same readings!
The install was super easy and it actually looks decent. I was worried they would look like covers over the windows but they appear more like thick window screens.
Hopefully they hold up long term, but for the price you really can’t beat it! Thank you so much!”
We also get a lot of people who call to tell us about their hot skylights.
The difference that one skylight with a lot of sun exposure can make to a room is astounding.
We’ve heard from customers who tell us they’ve abandoned entire rooms because of how unbearable they can get from a hot skylight.
With EZ Snap skylight shades, you can get your house back.
Skylight Shade Temperature Difference
Here’s a customer review from Bob G. that shows the temperature difference EZ Snap made in their kitchen:
“Our kitchen has a number of southern facing windows plus skylights. When the outside temperature got more than 90 degrees – the kitchen would get into the high 80’s.
We ordered enough for two skylights and four windows with the EZ Snap system. Shipping was super fast and the packaging was well done.
The system was super simple to install. The install took about two hours, including going up and down on the roof.
After we installed, the temperature in the kitchen stayed in the 70’s even as it got to 90 degrees outside. Take a look at the picture – you can see the outside temp is 93 degrees, while it is a cool 76 degrees inside.”
With that kind of temperature swing, EZ Snap shades end paying for themselves through lower energy costs.
All you need is to keep it warm enough to stop your pipes from freezing.
A nice bonus from using skirting is that your floors will stay warmer. Most of the cold in a tiny home is coming up through the floor, so having a warmer undercarriage means reducing your heating costs and staying more comfortable.
If you have decided that you want to skirt your tiny home, the next decision to make is what materials to use.
Chances are if you live in a tiny house you are a seasoned DIYer, and there are no shortage of do it yourself options.
Rigid Foam Insulation
Using rigid foam insulation boards is one of the most popular choices for skirting a tiny house.
It’s inexpensive, easy to cut and easy to install.
The biggest problem with foam insulation is that the panels are so lightweight that they can easily blow off unless you build extra reinforcement.
This is typically done by building a frame and then attaching the panels to it.
If you care about aesthetics you’ll also need to put in some extra work because the insulation panels can be an eyesore on their own.
It’s the type of project that is a lot of work up front, but if you are planning to spend years in one spot then you can just leave it up and not have to worry about it.
If you foresee yourself moving at any point in the near future, however, it would most likely mean leaving your frame and insulation behind as it would be too big and heavy to bring with you.
Buying and cutting large sheets of plywood is another common option for skirting.
It’s durable, fairly inexpensive and is available everywhere.
Because plywood is heavy, it also doesn’t necessarily need a frame built for it.
There also isn’t a lot of skill or tools required so it can be done by pretty much anyone.
It’s becoming an increasingly common problem for many homeowners.
If you are finding streaks of your turf melted and discolored, the culprit is most likely a nearby window that has something called low-e glass in it.
Illustration of how low-e glass windows work.
Low-e glass is glass that has been treated with a type of energy efficient coating. The glass is coated with a microscopic, transparent metallic layer that reflects heat, but still allows light to pass through.
These windows are good at cutting down the amount of heat entering a house, which is why more and more homes are being built with them installed. However, they can also act like a giant magnifying glass.
Low-e windows are all double paned, and when there is a difference in pressure between the outside air and the interior of the glass panes, the windows may slightly warp and bend. This can create a concave effect in the glass.
This concave effect, coupled with the reflective low-e coating, can focus sunlight into a concentrated hot spot, just like you see with a magnifying glass.
The temperature of these hot spots can get so high that they destroy anything they touch.
It’s increasingly common for these low-e windows to melt synthetic turf, vinyl siding and even cause natural grass to catch fire.
If a large enough patch of turf has been melted, it will need to be replaced. Since artificial turf can cost anywhere from 5 – 25 dollars a square foot (not including labor),replacing damaged turf is a costly and time consuming process.
EZ Snap customer with a hot spot on his lawn that was over 190°F.
As more and more homes are getting low-e windows installed, so are the amount of people finding their turf being damaged. Even if you don’t have low-e windows your lawn may still get scorched.
If you are seeing signs of damage to your turf and don’t have low-e windows on your house, the cause may be one of your neighbors windows.
What can be done about Melting Turf?
First, know that if you take the time and money to replace your lawn but don’t address the cause, it’s just going to happen again.
A simple solution would be to put something up, such as a patio umbrella, to protect your turf. This would only be a temporary fix though, because anything you put in the way of the hot spot will only get destroyed.
What needs to happen is for the sun’s rays to be blocked before they can hit the window and reflect back out. If the solar heat is cut down before it ever touches the glass, then there is nothing to reflect out and your lawn is safe.
Fortunately, EZ Snap Shade Screens are the ideal solution. They can be installed right over the problematic low-e glass window quickly and easily, and for a lot less than it would cost to replace the entire window.
View from a window with EZ Snap Shade Screen.
EZ Snap Shade Screens are proven to stop up to 90% of the sun’s rays from reaching the glass. You get all of the cooling power of a low-e window, but without the risk of creating hot spots.
They are easy to order and can be installed by someone with no previous experience.
One of the reasons why low-e glass is so popular is that it blocks heat while still allowing light to shine through. What’s great about EZ Snap is that it uses an optical grade mesh, meaning EZ Snap blocks the heat but not the view. The screens are also guaranteed to fit all window sizes and shapes.
To learn more about EZ Snap and it’s benefits, click here.
1. Any R-Value savings are much smaller the closer the outside temperature is to the inside temperature.
When the temperature dips below zero, the area under an RV is typically kept just above the freezing point by an electric heater. Because of this, the temperature differential between outside and inside air is very small, as is the heated cubic square footage under the RV. This is unlike a house, where inside temperatures are typically kept at 70 degrees or more and where the cubic square footage is about 2500% larger than that of an RV’s.
2. RV skirting would need to be very thick to produce any significant R-Value rating.
R-Value is the resistance to heat flow through a given thickness of material. For example, a typical home in the USA has wall insulation of R-11 to R-15. Your RV Skirting would need to have a sewn-in insulation that is 4 to 5 inches thick to achieve this R-value. Most RV Skirting that claims to be insulated is less than a half an inch thick. At this thickness, there is only the illusion of an R-value.
3. Stopping air movement is 10 times more important than R-Value for RV skirting.
What good is wearing a winter coat if you have the zipper undone? The most important way to retain heat and keep cold air out is a barrier to air-flow (RV Skirting), not insulation. As long as the warm air is contained under the RV and the majority of the cooler outside air is kept out, adding insulation to the skirting is a waste of money. The barrier to airflow created by the skirting is really all that is needed.
4. If you are in an extreme winter climate what is the best way to add R-Value to your skirting?
As mentioned above, the sewn-in variety of insulation (ie: Poly-fill or reflective bubble wrap) adds very little value to RV skirting and is not necessary in 90% of RV skirting projects. The exception to this rule is if the RV is wintering in an extremely cold area where temperatures are commonly 15 degrees or more below freezing. In this situation you will want to have both RV skirting and an insulated barrier of rigid Styrofoam board. Rigid Styrofoam insulation board is by far the most effective way to get a higher R-value without adding a lot of thickness.
Typically this board has an R-value of R5 per inch of thickness. The best variety of this board is extruded polystyrene foam board, also called blue or pink board in the big box stores. To use this board with your skirting, build a frame work under the RV using inexpensive 2” x 2” lumber, then attach the foam board to the framework. Once the foam board is in place, then you can install your RV skirting to seal the warm air in and the cold air out.
5. The best heat source to use under your RV skirting.
In warm climates many RVers use a 100 watt light bulb to create a heat source, but there is a much safer and efficient way to heat the area under your skirting . Use one or two thermostatically controlled space heaters with a built-in fan under the RV. In longer RVs, place a heater at each end of the RV facing the opposite end. Turn the thermostat control to just above the point of freezing. When the temperature dips down close to the freezing point, the heaters come on and blow warm air around the entire area underneath the RV. This is a very safe and efficient heat source, as it is only using energy when needed. Be sure to see the heaters we recommend on the EZ Snap RV skirting product page at https://ezsnapdirect.com/products/rv-skirting/.
EZ Snap Innovations has developed the perfect solution to providing shade to any shape of window, curved, arched or even round.
Blinds for Arched Windows (Block the Heat, Not the View)
The specialized EZ Snap shading mesh is able to stop up to 90% of the sun’s heat and damaging UV rays, but it does not block your view. The EZ Snap mesh is made using an optical grade, exterior shading material. This allows you to see clearly through the mesh as if it was not even there.
Specialized Shading Mesh can be cut and shaped to fit any shape of window
The EZ Snap exterior shades are made from an innovative shading mesh the can be cut to any size or shape without fraying. The EZ Snap mesh utilizes encapsulated yarns in its manufacturing procedure, producing an extremely strong , dimensionally stable shading mesh. These special properties are what allow you to cut to size your exterior blinds right on site for a perfect fit every time.
Ideaconnection.com profiles new and exciting breakthrough technologies and products. The innovative EZ Snap fastener system has revolutionized the exterior shading of windows, providing an easy way for home owners to make their own quality shades for much less than competitive products.
Get our latest news and product information. It is a great way to keep up with who are latest authorized installers are and where they are located. It is also a great way to be the first to know about any product information updates or announcements.
EZ Snap has recently released a “How to” video on Installing your own RV Skirting.
If you are at all handy or a “Do-it-Yourselfer” DIY type, here is your opportunity to not only get a custom fit RV Skirting, but also save yourself a bundle of money at the same time.
NO EXPERIENCE NECESSARY!
RV Skirting – Step by Step Video shows you how.
This video is designed to show you not only the benefits of installing your own RV Skirting, but also the step by step procedure of doing it. It covers the various tools you will need. You will be surprised to know just how simple it is to install your own RV skirting on your motor-home, trailer or fifth wheel.
The video also covers how to determine the size of the RV skirting kit you will need. Also you will learn how to determine the mounting locations of your fasteners and how to install the fasteners. In addition, you will also learn how to cut your RV skirting to size and fit it to your RV for a custom professional look. The EZ Snap pipe retainment system is also shown. This helps keep your skirting in place in winds and also maintains a nice tight look.
Near the end of the video, there is also a section on installing a fifth wheel enclosure skirt to the front of your 5th wheel. And finally at the end of the video the all-important EZ Snap removal tool is detailed. The Instant RV Skirting zippers that are featured near the end of the video has now been discontinued and replaced by either a sewn in zipper for the fifth-wheel enclosure area or you can use the EZ Snap RV Skirting Gecko Velcro . This Velcro is specially designed to stay stuck stick to the RV skirting through all types of weather conditions.
The new and improved EZ Snap adhesive stud is now available.
The holding power and performance of this new stud has greatly improved over the original.
adhesive stud is the ideal solution for attaching all the various EZ Snap™ products, except on wooden, rough or porous surfaces. With those types of surfaces, our stainless steel screw studs are still your best choice. This new stud is now our standard and the original is now discontinued.
These new studs are also now available in a variety of colors. White, black, grey and beige studs are now available. This allows you to better match the stud to the mounting surface color. That way, if your EZ Snap™ product is removed, the studs do a better job of blending in to the mounting surface.
If you’ve ever experienced a bird window collision you know it’s heartbreaking, and such widespread bird loss impacts our environment.
Birds are one of the most important players in our ecosystem. They help keep the pest population under control, they act as nature’s clean-up crew, they disperse seeds and much more.
Reducing the amount of birds hitting windows would not only mean protecting birds from harm, but also conserving our environment.
The White-throated Sparrow is one of the most commonly reported victims of window collisions. Photo by Cephas.
The reason birds fly into windows is because they don’t recognize glass as a solid surface. Birds will hit windows at full speed either because they can’t see the glass, or they believe the reflections they see in them are real and will fly towards them.
Unfortunately, most of the time window strikes happen without anyone realizing it. Either no one is in the room, or it’s too quiet of a sound for anyone to realize what happened. If the bird isn’t killed outright from the collision, they typically suffer broken wings or legs, making them easy prey for predators or scavengers.
For the person with a window that has had bird strikes, there are a lot of bird crash prevention products available.
One of the most popular is reflective tape. It’s designed to be a visual and auditory deterrent, with light reflecting off of it and the tape making a noise by twisting in the wind.
The other most common types of bird deterrents are decals and tapes.
There are a lot of varieties of these on the market, but they all work in the same basic way. They stick onto windows and as long as they are spaced correctly, birds will be no longer perceive the glass as a clear passage.
These options are usually inexpensive and can be applied fairly quickly.
However, window decals and bird silhouettes only reduce the chance of a collision, and all will obstruct your view.
There is another easy and inexpensive solution, and this one won’t block your view.
View looking through EZ Snap Shade Screen.
EZ Snap Window Shades are ideal for preventing bird window strikes. EZ Snap Window Shades are a sun blocking screen that once installed, eliminate the reflectively of the glass completely.
Birds perceive the EZ Snap Shade as a solid object and won’t fly into it.
Also, because EZ Snap uses an optical grade mesh, you will still be able to see out of it and keep your view.
The kits are easy to install and can be hung in as little time as an afternoon.
We recently had a customer write to us to say that he was having a problem with bird strikes at his house and decided to try EZ Snap.
He said, “I wondered if installing the EZ Snap Screens on those windows might help prevent bird strikes on the glass. I can say now that it was an easy solution to a heart wrenching problem. We have not had any bird fatalities since I installed the screening this spring. The screens still allow plenty of daylight into the building and, of course, it allows unobstructed views to the outdoors. Easy to install and it performs as advertised.” Follow this link to read the full review from L. Stephenson.
What to do if you have a bird strike your window and you find it stunned or injured:
Watch the bird carefully before getting close. It may be able to recover quickly and fly off right away.If the bird is conscious and sitting in a safe area, it may not need to be moved while it recovers.
If the bird is unconscious, gently pick it up and examine it for injuries.
If the bird is severely hurt, it will need immediate attention from a bird rescue organization.
If the bird is just stunned, gently place it in a cardboard box with sufficient air holes.
Once the bird is safe in the box, take it to somewhere warm and quiet.
Check on the bird regularly, but never open the box when you do. If the bird has recovered you don’t want it flying out indoors where it might get hurt again.
If it sounds like the bird is active, take the box outside and open it there.
Step away and see if the bird flies away.
If it doesn’t, close the box and bring it back inside.
If it’s been two hours and the bird still has not recovered, take it to the closest wild animal rehabilitation centre where it can get the proper care that it needs.